- Home
- RFID Software
- ReaderSense Edge + MDM
On the recordRead 5 Oct 202623 facts
ReaderSense Edge + MDM
New Delhi, India
On the record
- Browser interface
- The reader serves its own browser interface on port 80, accessible from a laptop or phone on the local network without an installer or on-site PC.identiumone.com · read 5 Oct 2026
- Enrollment and revocation
- MDM uses scoped, time-boxed enrollment tokens and lets administrators revoke an individual device; remote actions are recorded in hub and device audit logs.identiumone.com · read 5 Oct 2026
- Fleet management
- MDM reports reader health and telemetry and supports live remote sessions, configuration pushes and firmware updates through each reader’s outbound tunnel.identiumone.com · read 5 Oct 2026
- Hardware requirements
- Edge runs on an Identium fixed reader’s quad-core ARM64 Linux board with 2 GB RAM and eMMC storage, plus Ethernet, serial ports, USB, and industrial I/O.identiumone.com · read 5 Oct 2026
- Integrations
- The product supports HTTP or WebSocket data upload, MQTT with TLS, rules-triggered webhooks, and RS485 Modbus RTU; the maker says these paths do not require an Identium account.identiumone.com · read 5 Oct 2026
- Intended users
- The maker describes the product for reader deployments such as warehouse gates, production stations, and store exits, with MDM for managing fleets across sites.identiumone.com · read 5 Oct 2026
- I/O
- The board has four isolated inputs and four outputs, including three relays and one driver, for equipment such as barriers, stack lights and PLC handshakes.identiumone.com · read 5 Oct 2026
- Location limits
- The product reports zone-level tracking typically at 1–3 m, direction and radial speed, but says it cannot provide whole-floor item coordinates, angle-of-arrival positioning or phase ranging in the stated band.identiumone.com · read 5 Oct 2026
- MDM enrollment and audit
- MDM enrollment tokens are scoped and time-boxed; devices can be revoked individually, and remote actions are recorded in hub and device logs.identiumone.com · read 5 Oct 2026
- MDM remote access
- Readers connect to MDM through an outbound encrypted WebSocket, allowing remote sessions, configuration pushes, and firmware updates without opening inbound network ports.identiumone.com · read 5 Oct 2026
- Offline operation
- Reads are stored in SQLite on the board’s eMMC and queued events drain in order when the network returns, including after reboots.identiumone.com · read 5 Oct 2026
- On-reader interface
- The reader serves a browser interface on its own address, accessible from a laptop or phone on the LAN without an installer or on-site PC.identiumone.com · read 5 Oct 2026
- Pilot
- The maker invites customers to pilot one Edge reader on one gate for a month.identiumone.com · read 5 Oct 2026
- Pricing and licensing
- The product page gives no price; the maker’s export page says software is included or licensed depending on the product and stated on the quotation.identiumone.com · read 5 Oct 2026
- Purpose
- ReaderSense Edge is RFID middleware that runs on a fixed reader’s Linux board, while MDM provides a cloud console for managing the reader fleet.identiumone.com · read 5 Oct 2026
- Reader hardware
- Edge runs on an industrial Linux board with quad-core ARM64, 2 GB RAM and eMMC storage, built into Identium fixed readers.identiumone.com · read 5 Oct 2026
- Rules and alerts
- Rules can trigger relay pulses, alarm patterns, read bursts or webhooks, and alerts remain available after network outages.identiumone.com · read 5 Oct 2026
- Rules and I/O
- Rules can respond to input edges or tag events by pulsing a relay, sounding an alarm, triggering a read burst, or calling a webhook.identiumone.com · read 5 Oct 2026
